Fog/Driving Lamp Switch: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.







2. Remove the instrument panel finish panel.
1 Remove the screws.
2 Remove the center instrument panel finish panel.
3 Disconnect the electrical connectors.







3. Remove the fog lamp switch.
1 Remove the screws.
2 Remove the mounting bezel.
3 Release the two tabs and remove the fog lamp switch.

INSTALLATION

















1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.