1-2 Accumulator

Special Tools:

Removal





1. Using the special tool, compress the 1-2 accumulator cover and remove the accumulator piston retaining ring.





2. Note: Note the location of the 1-2 accumulator springs for reference during assembly.

Remove the 1-2 accumulator.
1. Remove the 1-2 accumulator cover.
2. Remove the lower 1-2 accumulator spring.
3. Remove the accumulator piston.
4. +Remove the upper 1-2 accumulator spring.

Installation





1. Install the 1-2 accumulator.
1. Install the 1-2 accumulator upper spring.
2. Install the accumulator piston.
3. Install the 1-2 accumulator lower spring.
4. Install the cover and seal assembly.





2. Using the special tool, install the accumulator piston retaining ring.