Aero

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim panel.
3. Remove the front door watershield.
4. Remove the mirror sail cover to gain access to the mirror retaining nuts.







5. Remove the outside rear view mirror.
1 Disconnect the power mirror electrical connector.
2 Disconnect the power mirror wiring clip.
3 Remove the outside rear view mirror nuts.
4 Remove the outside rear view mirror.
^ Feed the power mirror wiring through the opening in the front door.

NOTE: Exterior mirror without heat shown. Mirrors with heat option use two electrical connectors.

INSTALLATION







1. To install, reverse the removal procedure.