Bar and Link

Bar and Link - F-450, F-550

Removal

1. CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during re-assembly to ensure proper retention of these parts.

Raise and support the vehicle.






2. Remove the stabilizer bar link.
1. Remove the nut.
2. Remove the nut, washer and bolt.
3. Remove the stabilizer bar link.
4. Repeat on the other side.






3. Remove the stabilizer bar.
1. Remove the retainer bracket bolts.
2. Remove the retainer brackets.
3. Remove the stabilizer bar.

Installation










1. Using new fasteners, follow the removal procedure in reverse order.