Rear Bench, Crew Cab

DISASSEMBLY
1. Remove the seat.
2. Remove the seat back.







3. Remove the cup holder from the center of the seat, if so equipped.







4. Remove two cup holder screws, if so equipped.







5 Remove the right and left seat risers (right side shown, left side similar).







6. Remove the right and left seat spacers.

NOTE: Note location of spacers when removing for installation reference.







7. Unfasten the seat cushion cover J-strips and remove the seat cushion cover.
8. Remove the seat cushion from the seat frame.







9. Remove four armrest bolts, if so equipped.







10. Remove the armrest bracket bolts, if so equipped.







11. Unzip armrest cover and remove from the armrest.







12. Unfasten the seat back cover J-strips and remove the cover.







13. Remove the seat back cushion from the seat back frame.

ASSEMBLY



























1. To install, reverse the disassembly procedure.
2. Check the restraint system for correct operation.