Starter Motor: Service and Repair

REMOVAL

WARNING: WHEN REPAIRING STARTER MOTOR OR PERFORMING ANY MAINTENANCE IN THE AREA OF THE STARTER MOTOR, NOTE THE HEAVY GAUGE INPUT LEAD CONNECTED TO THE STARTER SOLENOID IS HOT AT ALL TIMES. MAKE SURE THE PROTECTIVE CAP IS INSTALLED OVER THE TERMINAL AND IS REPLACED AFTER REPAIR.

1. Disconnect the battery ground cable.







2. Remove the bolts and lower the starter motor.







3. Remove the cap.







4. Remove the nuts and remove the starter motor.

INSTALLATION












1. Follow the removal procedure in reverse order.