Planetary Gearset-Low/Reverse

Planetary Gearset-Low/Reverse
The low/reverse planetary gearset is connected to the reverse brake drum by lugs from the low/reverse brake drum to the lugs of the low/reverse planetary gearset.
^ The low/reverse planetary gearset is driven by the forward sun gear, which is splined to the input shell.
^ The splines of the forward sun gear drive the pinions in the low/reverse planetary gearset.
^ The pinions of the low/reverse planetary gearset drive the output shaft ring gear and output shaft hub, which is splined to the output shaft.
^ The low/reverse planetary gearset is held by the low one-way clutch in the low/reverse brake drum, when the low/reverse band is applied.

Input Shaft
The input shaft is supported by two bushings in the stator support.
^ End positioning of the input shaft is controlled by the splines in the converter turbine and the front planetary carrier.

Output Shaft
The output shaft is supported by a bearing in the case and by the slip yoke bushing in the extension housing. End positioning is controlled by the parking pawl gear and snap ring shoulder and by the reverse ring gear hub and snap ring.