Without Safety Belt Buckle Pretensioners
Diagnostic Tool, Restraint System:
SPECIAL TOOL(S)
REMOVAL
WARNING:
^ ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^ AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER AFTERWARDS.
^ NEVER PROBE THE CONNECTORS ON THE AIR BAG MODULE. DOING SO CAN RESULT IN AIR BAG DEPLOYMENT, WHICH CAN RESULT IN PERSONAL INJURY.
1. Remove the 60 percent bench seat.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SEAT REMOVAL AND INSTALLATION PROCEDURE.
2. Remove the bolts and the center child safety seat tether anchor.
3. Detach the J-clip fastener located behind the center child safety seat tether anchor.
4. Detach the J-clip fastener.
5. Remove the bolt.
6. Remove the seat armrest.
7. Remove the armrest bracket shrouds.
8. Remove the two bolts and the armrest bracket.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW WARNINGS, CAUTIONS, AND NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Position the armrest bracket. Install the two bolts.
2. Install the armrest bracket shrouds.
3. Install the seat armrest.
4. Install the bolt.
5. Position the front seat cushion trim cover. Secure the J-clip fastener.
6. Position the front seat cushion trim cover. Secure the J-clip fastener located behind the center child safety seat tether anchor.
7. Install the center child safety seat tether anchor and the bolts.
8. Install the 60 percent bench seat.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SEAT REMOVAL AND INSTALLATION PROCEDURE.
9. Check the active restraint system for correct operation.