Test L: LFC 35/DTC B1935 - Passenger Air Bag Circuit Resistance Lo

L1:

L1:

L2:

L2 - L3:

L4 - L5:

L6:

Normal Operation
The Restraints Control Module (RCM) monitors the resistance of the passenger air bag ignitor by measuring the resistance between pins 6 and 7. If the RCM detects low resistance between these pins, it will store a Diagnostic Trouble Code (DTC) B1935 in memory and flash a Lamp Fault Code (LFC) 35 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
Passenger air bag low resistance could be caused by:
^ wiring, terminals, or connectors.
^ a low resistance in the passenger air bag module.
^ an RCM internal concern.