| E-250,E-350 | | |
| Brake disc maximum runout | 0.00 15 inch |
| Disc brake caliper pin bolts | 27 ft.lbs. |
| Caliper flow bolt | 26 ft.lbs. |
| Brake caliper support bracket support bolts | 100 ft.lbs. |
| Anchor plate | 128 ft.lbs. |
| E-450 | Minimum lining thickness before discard | 0.118 inch |
| Brake disc thickness maximum variation | 0.0010 inch |
| Brake disc braking surface maximum runout | 0.008 inch |
| Brake caliper support bracket-to-rear axle flange nuts | 87 ft.lbs. |
| Brake disc shield bolts | 72 in.lbs. |
| Caliper flow bolt | 26 ft.lbs. |
| Caliper bleed screw | 72 in.lbs. |
| Fluid Type | | High Performance Dot 3 Brake Fluid |
| Lubricant | | Silicone Brake Caliper Grease and Dielectric Compound |