Cruise Control Servo Cable: Service and Repair
REMOVAL1. Remove the engine air cleaner.
2. Remove the air cleaner outlet tube.
3. Remove the accelerator control splash shield.
4. Disconnect the speed control cable.
1 Disconnect the speed control cable from the throttle body cam.
2 Squeeze the retaining tabs and remove the speed control cable.
5. Position the radiator coolant recovery reservoir aside.
1 Remove the bolts.
2 Position the radiator coolant recovery reservoir aside.
6. Remove the speed control cable.
1 Press the locking tab in.
2 Rotate the speed control cable cap and disconnect the speed control cable.
3 Remove the speed control cable.
INSTALLATION
1. To install, reverse the removal procedure.