Liftgate Latch

REMOVAL
1. Remove the liftgate trim panel.







2. Disconnect the liftgate ajar switch electrical connector.







3. Disconnect the liftgate latch actuating rod.
1 Open the clip.
2 Disconnect the actuating rod.







4. Remove and discard the liftgate latch bolts.
5. Remove the liftgate latch.


INSTALLATION


1. To install, reverse the removal procedure.

NOTE:
^ Make sure the liftgate latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
^ Position the liftgate latch release rod by pushing outboard to remove the slack.