Transaxle Draining and Filling

Transaxle Draining and Filling

All vehicles
1. Raise and support the vehicle.





2. Remove the drain plug and drain the fluid.





3. NOTE: Use a new gasket on the drain plug. Install the drain plug.

4. Remove the LH splash shield.

4X4 vehicles





5. Remove the plug.

4X2 vehicles





6. Remove the plug.





7. NOTE: 4X2 shown, 4X4 similar.

Fill the transmission with gear oil until level with the fill hole.





8. NOTE: 4X2 shown, 4X4 similar.

Install the fill plug.
9. Install the LH splash shield.