Vented
REMOVAL1. Fully open the rear quarter window glass.
2. Remove the third row seat.
3. Remove the spare tire and the spare tire support pad.
4. Remove the C-pillar and D-pillar trim panels.
5. Position the quarter trim panel aside.
6. Disconnect the vent window actuating arm from the motor shaft.
7. Remove the fastener and the A/C duct.
8. Remove the 14 fasteners at the top, bottom and rear.
CAUTION: Use care not to damage the headliner when accessing the upper fasteners.
9. Remove the rear quarter window vent glass.
1 Remove the five fasteners.
2 Using care not to damage the seal, gently push the vent glass outward.
NOTE: The rubber seal will be removed with the vent glass.
CAUTION: Have an assistant hold the vent glass as it is removed.
10. Remove excess butyl sealant from the pinch weld.
INSTALLATION
1. To install, reverse the removal procedure.
^ Apply an 8 mm (5/16-in) bead of butyl meeting Ford specification WSB-M2G234-C to the pinchweld area.
^ Loosely install all the fasteners before tightening to final torque.