Rear Wiper Pivot Arm

REMOVAL







1. Lift the rear wiper pivot arm cover.

CAUTION: Use care to protect the vehicle paint finish when carrying out this procedure or possible damage may occur.







2. Remove the rear wiper pivot arm.
1 Remove the nut.
2 Remove the rear wiper pivot arm.
3 Disconnect the rear window washer hose.

INSTALLATION







1. Operate the rear window wiper motor to the park position.
1 Turn key to RUN position.
2 Turn the rear window wiper switch to the INT 1 position.
3 Allow the rear window wiper motor to operate for at least one cycle.
4 Turn the rear window wiper switch to the OFF position.







2. Install the rear wiper pivot arm.
1 Connect the rear window washer hose.
2 Install the rear wiper pivot arm with the wiper blade parallel to the bottom of the rear window.
3 Install the retaining nut.







3. Install the rear wiper pivot arm cover.
4. Operate the rear wiper for at least one cycle and observe that the pivot arm is in the correct park position once the rear wiper motor is allowed to park.
5. If the rear wiper pivot arm does not park in the correct position, repeat steps one and two.