Sealed Beam

REMOVAL







1. Remove the parking lamp assembly.
1 Remove the parking lamp bolts.
2 Position the parking lamp assembly so the electrical connectors can be accessed.
3 Disconnect the electrical connectors.

NOTE: The side marker lamp and parking lamp are one piece. Do not pull on the side marker to pull the assembly out.







2. Remove the headlamp bezel.
1 Remove the upper bolts.
2 Remove the lower bolts.
3 Remove the headlamp bezel.







3. Remove the headlamp.
1 Remove the headlamp retaining ring screws.
2 Remove the headlamp retaining ring.
3 Position the headlamp so the electrical connector can be accessed.
4 Disconnect the electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.