Torque
| Balancer shaft bearing cap bolts and studs | 89 inch lbs. | |
| Valve cover bolts | 89 inch lbs. | |
| Camshaft bearing cap bolts | 71-106 inch lbs. | |
| Cylinder head temperature sensor (CHT) | 18-20 ft. lbs. | |
| Camshaft position sensor bolt | 71-106 inch lbs. | |
| Crankshaft position sensor bolt | 71-106 inch lbs. | |
| Connecting rod bolts | Stage 1 | 32 ft. lbs. |
| Stage 2 | 90 degrees to 120 degrees | |
| Crankshaft damper pulley bolt | Stage 1 | 66 ft. lbs. |
| Stage 2 | Loosen 360 degrees | |
| Stage 3 | 37 ft. lbs. | |
| Stage 4 | 90 degrees | |
| Crankshaft main bearing bolts (vertical) | Stage 1 | 22 ft. lbs. |
| Stage 2 | 85 degrees to 95 degrees | |
| Crankshaft main bearing bolts (cross mounted) | Stage 1 | 30 ft. lbs. |
| Stage 2 | 85 degrees to 95 degrees | |
| Cylinder head bolts The cylinder head bolts must be discarded and new bolts installed. They are tighten-to-yield designed and cannot be reused. | Stage 1 | 27 - 32 ft. lbs. |
| Stage 2 | 85 degrees to 95 degrees | |
| Stage 3 | 85 degrees to 95 degrees | |
| Exhaust manifold nuts | 17-20 ft. lbs. | |
| Exhaust manifold studs | 89-115 inch lbs. | |
| Drive belt idler pulley bolt | 15-22 ft. lbs. | |
| Flexplate bolts | 54-64 ft. lbs. | |
| Engine front cover bolts | Bolts 1-7 | 15-22 ft. lbs. |
| Bolts 6-15 | 30-40 ft. lbs. | |
| Fuel injection supply manifold bracket bolts | 89 inch lbs. | |
| Heater return tube studs | 30-41 ft. lbs. | |
| Ignition coil | 45-61 inch lbs. | |
| Knock sensor bolt | 15 ft. lbs. | |
| Lower intake manifold to upper intake manifold bolts | Stage 1 | 18 inch lbs. |
| Stage 2 | 89 ft. lbs. | |
| Upper intake manifold to cylinder head bolts | Stage 1 | 18 inch lbs. |
| Stage 2 | 89 ft. lbs. | |
| Oil cooler assembly to oil filter adapter bolts | 41-44 ft. lbs. | |
| Oil bypass filter | 11-12.5 ft. lbs. | |
| Oil filter adapter bolt | 14.7-22 ft. lbs. | |
| Oil filter adapter bolt | 29-40 ft. lbs. | |
| Oil filter adapter nut | 15-22 ft. lbs. | |
| Wiring harness bracket nut | 11 ft. lbs. | |
| Oil filter adapter stud | 89-115 inch lbs. | |
| Oil level indicator tube bolt - pickup chassis | 89 inch lbs. | |
| Oil pan bolts | Stage 1 | 18 inch lbs. |
| Stage 2 | 15 ft. lbs. | |
| Stage 3 | 90 degrees | |
| Oil pan drain plug | 98-143 inch lbs. | |
| Oil pressure sender | 107-142 inch lbs. | |
| Oil pump bolts | 89 inch lbs. | |
| Oil pump screen cover and tube bolts | 89 inch lbs. | |
| Oil pump screen and pickup tube spacer | 18 ft. lbs. | |
| Power steering pump bolts | 15-22 ft. lbs. | |
| Rear main oil seal retainer bolts | 71-106 inch lbs. | |
| Spark plugs | 71-106 inch lbs. | |
| Thermostat housing bolts | 14 ft. lbs. | |
| Timing chain guide bolts | 89 inch lbs. | |
| Timing chain hydraulic tensioner bolts | 18 ft. lbs. | |
| Water pump bolts | 18 ft. lbs. | |
| Water pump pulley bolts | 18 ft. lbs. | |
| Water temperature sensor | 12-17 ft. lbs. | |
| EGR valve to exhaust manifold tube fittings | upper fitting | 30 - 44 ft. lbs. |
| lower fitting | 30 - 44 ft. lbs. | |
| Brake booster vacuum hose bracket nut | 78-108 inch lbs. | |
| Power steering bracket upper bolts | 71-106 inch lbs. | |
| Power steering bracket lower bolts | 26-33 ft. lbs. | |
| Fuel charging wiring connector bolt | 45-53 inch lbs. | |
| 42-pin bulkhead connector bolts | 53 inch lbs. | |
| Starter relay nuts (5.4L engine) | 44-99 inch lbs. | |
| Transmission cooler line nut | 15-22 ft. lbs. | |
| Wiring harness bracket nut | 11 ft. lbs. | |
| 42-pin connector bolt | 53 inch lbs. | |
| Accelerator control splash shield bolts | 53-72 inch lbs. | |
| Remote oil filter adapter line bolts (4x4 vehicles) | 71-106 inch lbs. | |
| Oil cooler insert | 41-44 inch lbs. | |
| Oil cooler bolt (4x4 vehicles) | 41-44 ft. lbs. | |
| Engine mount cross bolts | 39-53 ft. lbs. | |
| Engine mount through bolts | 50-68 ft. lbs. | |
| Engine mount nuts | 66 ft. lbs. | |
| Engine mount bolts | 59 ft. lbs. | |
| Cable bracket nut | 15-22 ft. lbs. | |
| Ground strap nut | 15-22 ft. lbs. | |
| Dual convertor Y-pipe nuts | 27-34 ft. lbs. | |
| Transmission mount nuts | 60-80 ft. lbs. | |
| Torque converter nuts | 25-34 ft. lbs. | |
| Transmission to engine bolts | 30-40 ft. lbs. | |
| Accelerator cable bracket bolts | 71-106 inch lbs. | |
| Engine oil indicator tube bracket bolt | 71-106 inch lbs. | |
| Transmission oil pan bolts | 10-12 ft. lbs. | |
| Oil pressure sensor | 107-142 inch lbs. | |
| Fan shroud bolts | 71-88 inch lbs. | |
| EGR back pressure transducer nuts | 71-106 inch lbs. | |
| Radio interference capacitor bolt | 71-106 inch lbs. | |
| EVR solenoid bracket bolts | 71-106 inch lbs. | |
| EGR transducer bracket bolts | 71-106 inch lbs. | |
| Accumulator suction line nut | 62-79 inch lbs. | |
| Wiring bracket nut | 15-22 ft. lbs. |