Low One-Way Clutch Assembly

Low One-Way Clutch Assembly





Item 1 - 2





Item 3 - 11

Low/Reverse 0ne-Way Clutch Assembly and Piston, Disassembled View

Disassembly and Assembly





1. Remove the output shaft ring gear and the No. 12 thrust bearing.
1 Remove the ring gear.
2 Remove the bearing.





2. If necessary, remove the low one-way clutch (17 roller) assembly by rotating it counterclockwise to unlock the tabs.
3. Inspect the following:
- Reverse clutch hub thrust surfaces for scores.
- Reverse clutch hub splines for wear.
- Outer and inner low/reverse one-way clutch race for scores and damaged surface areas where rollers contact races.
- Rollers and springs for excessive wear or damage.
- Spring and cage.
4. Follow the disassembly procedure in reverse order.