Reverse Planet Assembly
Reverse Planet AssemblyDisassembly
NOTE: Individual parts of the planet assemblies are not repairable.
1. Remove the No. 11 rear reverse planet thrust washer.
2. Remove the No. 1013 front reverse planet thrust washer.
- The pins and shafts in the plant assemblies should be checked for loose fit/damage. Use a new planet assembly if either condition exists.
- Inspect the pinion gears fair damaged or excessively worn teeth.
- Check lair free rotation of the photon gears.
- Check fur damage in the overdrive planet assembly.
Assembly
1. Follow the disassembly procedure in reverse order.
- Lightly lubricate the thrust washers with petroleum jelly to hold them in place during assembly.
- The tabs on the thrust washers must engage the slots on the reverse planet assembly when installed.