B-Pillar Trim Panel

Safety Belt Bolt Bit:

SPECIAL TOOL(S)

REMOVAL







1. Remove the windshield side garnish moulding.







2. Remove the scuff plate.
1 Starting at one end and working along the scuff plate, release the scuff plate locking tabs.
2 Remove the scuff plate.







3. Remove the coat hook.
1 Remove the screw.
2 Remove the coat hook.







4. From behind the front shoulder safety belt guide cover, release the retaining tab and open the cover.

NOTE:
- Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed, install a new shoulder safety belt guide cover.
- Shoulder safety belt guide cover shown removed for clarity.







5. Remove the nut and shoulder safety belt guide.
6. Position the carpet aside.







7. Using the special tool, remove the front safety belt anchor bolt.







8. Remove the B-pillar trim panel.
1 Remove the pin-type retainer.
2 Feed the safety belt webbing through the opening.
3 Remove the B-pillar trim panel.

INSTALLATION
1. To install, reverse the removal procedure.