Panel - Body Side Outer

REMOVAL







1. Remove the pickup bed three exterior tie-downs.
1 Remove the six bolts.
2 Remove the three tie-downs.

CAUTION: When installing the pickup bed exterior tie-down make sure to correctly align the locating tabs.







2. Remove the body side outer moulding.
- Start at the front inside and roll the moulding to the outside to release the moulding.
3. Remove the pickup bed.







4. Remove the rear lamp assembly.
1 Remove the bolts.
2 Remove the rear lamp.
- Disconnect the electrical connectors.







5. Remove the body side outer panel bolts.







6. Remove the four rear wheel house panel screws.







7. Remove the front body extension panel screws.







8. Remove the body side outer panel.
1 Remove the bolts.
2 Remove the body side outer panel.

INSTALLATION
1. To install, reverse the removal procedure.