Engine, Cooling and Exhaust: Technical Service Bulletins

• Customer Interest
  • Engine Controls - No Start/Hard Start/Rough Idle
    • Overview
    • IAC Diagnostic Service Tips - General
  • Engine Controls/Emissions - Exhaust Sulfur Smell
    • Overview
    • Service Procedure
  • Interior - Accelerator Pedal Vibration at 1500-1800 RPM
  • Engine Control - MIL ON, DTC P0300 or P0301 Set
  • Engine - Timing Chain Rattle Noise
  • A/C - Heater Core Electrolysis/Leakage
• By Symptom
  • Abnormal wear/deterioration
    • A/C - Heater Core Electrolysis/Leakage
  • Customer Interest
    • Engine Controls - No Start/Hard Start/Rough Idle
      • Overview
      • IAC Diagnostic Service Tips - General
    • Engine Controls/Emissions - Exhaust Sulfur Smell
      • Overview
      • Service Procedure
    • Interior - Accelerator Pedal Vibration at 1500-1800 RPM
    • Engine Control - MIL ON, DTC P0300 or P0301 Set
    • Engine - Timing Chain Rattle Noise
    • A/C - Heater Core Electrolysis/Leakage
  • Driveability
    • Engine Controls - No Start/Hard Start/Rough Idle
      • Overview
      • IAC Diagnostic Service Tips - General
    • Engine Control - MIL ON, DTC P0300 or P0301 Set
  • Leaks
    • A/C - Heater Core Electrolysis/Leakage
  • Noise
    • Interior - Accelerator Pedal Vibration at 1500-1800 RPM
    • Engine - Timing Chain Rattle Noise
  • Odors
    • Engine Controls/Emissions - Exhaust Sulfur Smell
      • Overview
      • Service Procedure
  • Vibration
    • Interior - Accelerator Pedal Vibration at 1500-1800 RPM
• All Technical Service Bulletins
  • Driveability - Vacuum Leak Detection
  • Engine - Aluminum Block/Head Machining
  • Engine Controls - No Start/Hard Start/Rough Idle
    • Overview
    • IAC Diagnostic Service Tips - General
  • Engine Controls/Emissions - Exhaust Sulfur Smell
    • Overview
    • Service Procedure
  • Interior - Accelerator Pedal Vibration at 1500-1800 RPM
  • Engine - Oil Level Indicator Markings
  • Engine Head Gasket - Approved Replacement Procedures
    • Overview
    • Service Procedure
      • Aluminum Cylinder Head - Removal From Engine
      • Inspection For Damage and Cleaning Procedure
      • Installation Onto the Cylinder Block Surface
  • Engine Control - MIL ON, DTC P0300 or P0301 Set
  • Engine Coolant - Propylene Glycol Recommendations
  • Cooling System - Premium Gold Coolant Service Info
  • Engine - Oil System Priming Procedures
  • Engine - Timing Chain Rattle Noise
  • Engine - Reman Engine Head Gasket Identification
  • A/C - Heater Core Electrolysis/Leakage