Generic Electronic Module (GEM)

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Prior to removal of the Generic Electronic Module (GEM), it is necessary to upload module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.

2. Remove the radio chassis.







3. Remove the center instrument panel finish panel.
1 Remove the screws.
2 Remove the center instrument panel finish panel.
^ Disconnect the electrical connectors.







4. Remove the GEM.
1 Remove the bolt.
2 Disconnect the electrical connectors from the GEM.

INSTALLATION
1. To install, reverse the removal procedure.

CAUTION: Once the new module is installed, it is necessary to download module configuration information from the appropriate diagnostic tool into the new module.