Ignition Switch: Service and Repair

Ignition Switch

Removal and Installation
1. Disconnect the battery ground cable.





2. Detach the hood latch release handle and position aside.
1 Remove the bolts.
2 Position the hood latch release handle aside.





3. Remove the lower instrument panel steering column cover.
1 Remove the screws.
2 Remove the lower instrument panel steering column cover.





4. Remove the instrument panel steering column opening cover reinforcement.
1 Remove the bolts.
2 Remove the instrument panel steering column opening cover reinforcement.





5. Disconnect the electrical connector.
1 Loosen the bolt.
2 Disconnect the electrical connector.





6. NOTE: The ignition key should be in the OFF position.

Remove the ignition switch.
1 Remove the screws.
2 Remove the ignition switch.
7. To install, reverse the removal procedure.