Rear Bumper: Service and Repair

BUMPER-REAR

Removal







1. Remove the two license plate lamp assemblies (one each side).
- Twit the lamp bulb and pull it out from behind the rear bumper (17906).

2. Support the rear bumper.







3. If equipped, position the receiver style trailer wiring receptacle and bracket aside.
1 Remove the bolt.
2 Position the wiring receptacle aside.







4. If equipped, position the standard trailer wiring receptacle aside.
1 Remove the bolt.
2 Position the wiring receptacle aside.







5. Remove the rear bumper.
1 Remove the nuts.
2 Remove the rear bumper.







6. If necessary, remove the rear bumper step pads.

Installation

















1. To install, reverse the removal procedure.