Pickup Bed

PICKUP BED

Removal and Installation
1. Remove the tailgate.
2. Remove the tail lamps.
3. Remove the rear bumper.







4. Disconnect the rear tail lamp electrical connector.
5. Remove the rear tail lamp wiring harness from the pickup bed.







6. Remove the screws (8 ft. bed shown, 6 ft. bed similar).







7. Loosen the fuel filler assembly hose clamps, then position the fuel filler assembly aside.







8. Remove the bolts.

9. CAUTION: Handle the pickup bed carefully when removing from the vehicle to avoid damage to the cab or bed finish.

NOTE: For 6-3/4-foot and 8-foot pickup beds, three assistants are necessary to remove the pickup bed from the vehicle.

Carefully lift and remove the pickup bed from the vehicle.

10. To install, reverse the removal procedure.