Bench

REMOVAL
1. Remove the front safety belts from the front seat.







2. Remove the retainers, disconnect the safety belt buckle electrical connector, and remove the front seat.

NOTE: Removing the front seat requires more than one technician.

INSTALLATION
1. To install, reverse the removal procedure.
^ Adjust the seat to the full forward and rear ward positions a few times to assure safety belt and buckle accessibility.
^ Make sure the safety belt is not twisted prior to installation.

NOTE: When installing the seat, tighten the front mounting bolts, then the rear mounting nuts.

2. Check the active restraint system for correct operation.