Aerodynamic

LAMP ASSEMBLY - HEADLAMP, AERODYNAMIC

REMOVAL

NOTE: RH shown; LH similar.







1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.

Pull up on the headlamp mounting clips to release the headlamp.







2. Remove the headlamp assembly.
1 Pull the headlamp assembly forward.
2 Disconnect the electrical connector.

INSTALLATION







1. Install the headlamp assembly.
1 Connect the electrical connector.
2 Install the headlamp assembly.







2. Push down the two headlamp mounting clips to secure the headlamp.
- If necessary, adjust the headlamps.