Connecting Rod, Engine

Connecting rod journal diameter 53.003-52.983 mm (2.0867-2.0859 inch)
Connecting rod journal maximum taper 0.004 mm (0.0002 inch)
Connecting rod journal maximum out-of-round between cross sections 0.0075 mm (0.0003 inch)
Connecting rod-to-pin clearance 0.009-0.0235 mm (0.0004-0.0093 inch)
Connecting rod pin bore diameter 22.012-22.024 mm (0.8666-0.8671 inch)
Connecting rod length (centerline bore-to-bore) 169.1 mm (6.6575 inch)
Connecting rod maximum allowed bend 0.038 mm (0.0015 inch)
Connecting rod maximum allowed twist 0.05 mm (0.0020 inch)
Connecting rod bearing 53.049-53.027 mm
bore diameter (with assembled liners) (2.0885-2.0877 inch)
Connecting rod bearing-to-crank shaft clearance 0.064-0.026 mm (0.0025-0.0010 inch)
Connecting rod side clearance 0.475-0.125 mm (0.0187-0.0049 inch)





Rod bearing caps.
Stage 1 43 Nm (32 ft. lbs.)
Stage 2 additional 105°