Auxiliary Climate Control

REMOVAL
1. If equipped, remove the third, fourth, and fifth bench seats as necessary.
2. If equipped, remove the trim panels.
^ Remove the left center bolster trim panel.
^ Remove the quarter trim rear upper panel.
^ Remove the lower rear body side trim panel.







3. Remove the blower motor.
1 Disconnect the electrical connector.
2 Remove the blower motor housing tube.
3 Remove the screws.
4 Remove the blower motor.







4. Remove the blower motor wheel.
1 Remove the retaining clip.
2 Remove the blower motor wheel.

NOTE: Note the location of the blower motor wheel on the blower motor.

INSTALLATION
1. To install, reverse the removal procedure.