Antenna, Radio: Service and Repair

ANTENNA BASE

REMOVAL

NOTE: The antenna base and the antenna upper cable are removed as an assembly.







1. Remove the radio antenna mast.
- Remove the radio antenna mast by turning it counterclockwise.







2. Unsnap the radio antenna base cap.







3. Remove the screws.







4. Remove the front fender apron.
1 Remove the screws.
2 Remove the bolts.







5. Remove the lower antenna mounting screw.







6. Remove the antenna cable.
1 Open the glove box door.
2 Release the tabs and lower the glove box to the full open position.
3 Release the antenna lead-in cable clips.
4 Disconnect the connector.
5 Push the antenna lead-in cable into the engine compartment.

7. Remove the antenna base and the antenna lead-in cable.

INSTALLATION
1. To install, reverse removal procedure.