Generic Electronic Module (GEM)

GENERIC ELECTRONIC MODULE (GEM)

REMOVAL

1. CAUTION: Prior to removal of the generic electronic module (GEM), it is necessary to upload module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.

Disconnect the battery ground cable.

2. Remove the radio chassis.







3. Remove the center instrument panel finish panel.
1 Remove the screws.
2 Remove the center instrument panel finish panel.
- Disconnect the electrical connectors.







4. Remove the GEM.
1 Remove the bolt.
2 Disconnect the electrical connectors from the GEM.

INSTALLATION

1. CAUTION: Once the new module is installed, it is necessary to download module configuration information from the appropriate diagnostic tool into the new module.

To install, reverse the removal procedure.