Pickup Bed

PICKUP BED

Removal and Installation
1 Disconnect the battery ground cable.
2. If equipped, remove the tonneau cover.
3. If equipped, remove the cargo divider.
4. Remove the tailgate assembly.
5. Remove the fuel filler cap.







6. Remove the fuel tank filler pipe screws.







7. Remove the bumper cover screws.







8. NOTE: Label the pickup bed bolts because they are not identical and must be installed in the same location that they are removed.

Remove the pickup bed bolts.







9. CAUTION: Protect the paint on the pickup bed and cab as the pickup bed is lifted.

Disconnect the pickup bed wiring harness electrical connectors.
1 Lift the rear of the pickup bed.
2 Position a suitable support between the pickup bed and the vehicle frame.
3 Disconnect the three electrical connectors.







10. With an assistant, remove the pickup bed and place it on a suitable support.
11. To install. reverse the removal procedure.