Hydraulic System: Description and Operation

Hydraulic Brake Actuation
This vehicle is equipped with a brake pedal actuated dual brake system. The system consists of the following:
^ brake pedal
^ power brake booster
^ brake master cylinder
^ brake pressure control valve (2-door vehicles)
^ disc brake calipers
^ rear disc brake calipers
^ brake tubes and hoses
^ Anti-lock Brake System (ABS) components
The dual brake system is split front and rear, with the front wheel brakes comprising one circuit and the rear wheel brakes, the other circuit.

Brake Fluid

WARNING: Use of any other brake fluid than approved DOT 3 will cause permanent damage to brake components and will render the brakes inoperative. Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately.

CAUTION: Brake fluid is harmful to painted or plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.

Use clean, fresh Ford High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25A.
^ Do not reuse brake fluid drained or bled from the system.
^ Do not use brake fluid that has been stored in an open container.
^ Do not use contaminated brake fluid.