Water Pump: Service and Repair

Water Pump

Removal and Installation
1. Drain the engine cooling system.
2. Remove the accessory drive belt.
3. Remove the fan shroud and fan blade assembly.





4. Remove the belt idler pulley.





5. Slide the water bypass hose clamp back.





6. Disconnect the heater hose at the water pump.
1) Release the clamp.
2) Remove the hose.





7. Disconnect the lower radiator hose at the water pump.
1) Release the clamp.
2) Remove the hose.





8. Remove the water pump pulley.





9. Remove the water pump.

10. NOTE: Use metal surface cleaner and a suitable plastic or wooden scraper to clean the sealing surfaces.

To install, reverse the removal procedure.