Power Seat Switch: Service and Repair

SEAT CONTROL SWITCH

REMOVAL

NOTE: Driver side shown, passenger side similar.

1. Remove the front seat.







2. Disconnect the power seat switch electrical connector.







3. Remove the front seat cushion side shield rear screw.







4. Remove the front seat cushion side shield screws.







5. CAUTION: Use care when disconnecting the seat cushion side shield from the seat cushion frame so the tabs on the seat cushion side shield are not damaged.

Disconnect the front seat cushion side shield.







6. Disconnect the power lumbar switch electrical connector and the power lumbar hose from the power lumbar switch (if equipped).







7. Disconnect the heated seat switch electrical connector (ii equipped).







8. Remove the front seat cushion side shield







9. Remove the 6-way power seat switch.
- Remove the screws, then remove the 6-way power seat switch.

INSTALLATION
1. To install, reverse the removal procedure.