Reverse Idler Gear
Reverse Idler GearDisassembly
1. Disassemble the reverse idler gear.
1. Remove the reverse idler gear retaining ring.
2. Remove the spacer.
3. Remove the reverse idler gear.
4. Remove the reverse idler gear bearing.
5. Remove the reverse idler gear thrust washer.
2. Measure the reverse idler gear end play.
Reverse Idler Gear Retaining Rings
^ If end play is not within specification, install a retaining ring of correct thickness.
Assembly
1. Assemble the reverse idler gear.
1. Install the reverse idler gear thrust washer.
2. Install the reverse idler gear bearing.
3. Install the reverse idler gear.
4. Install the spacer.
5. Install the reverse idler gear retaining ring.