Radio, Stereo, and Compact Disc: Service and Repair

AUDIO UNIT

Radio Removal Tool:

SPECIAL TOOL(S)

REMOVAL

NOTE: The following removal and installation procedures apply to all original equipment instrument panel mounted audio units.

1. Disconnect the battery ground cable.







2. Remove the center instrument panel finish panel.
1 Rotate the center instrument panel finish panel vents inward.
2 Through the vent openings, grasp the center instrument panel finish panel and pull outward.
3 Remove the center instrument panel finish panel.
- Disconnect the electrical connectors.







3. Using the special tool, pull out the audio unit.







4. Disconnect the radio antenna lead-in cable and the radio electrical connectors.

INSTALLATION
1. To install, reverse the removal procedure.