Exterior Rear View Mirror Cover

MIRROR - COVER, EXTERIOR REAR VIEW MIRROR

REMOVAL

All Mirrors







1. Position the mirror glass to obtain a gap at the upper edge of the mirror assembly.







2. Release the mirror cover upper clips.

Non-Signal Mirror







3. Position the mirror glass to obtain a gap at the inboard edge of the mirror assembly.







4. Release the mirror cover inboard clip.







5. Position the mirror glass to obtain a gap at the outboard edge of the mirror assembly.







6. Remove the mirror cover.
- Release the mirror cover outboard clip.

Signal Mirror
7. Remove the mirror cover.
- Disconnect the signal mirror electrical connector.

INSTALLATION







1. Install the mirror cover.
- If equipped, connect the electrical connector.
- Apply sufficient force to the mirror cover until it snaps into place.