Throttle Position Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the bolts and the accelerator control splash shield.







3. Disconnect the engine breather hose and the Idle Air Control (IAC) valve hose, and position aside.

NOTE: 5.4L shown, 4.6L similar.







4. Remove the differential pressure feedback Exhaust Gas Recirculation (EGR) system bracket nut and bolt, and position the bracket aside.







5. Disconnect the Throttle Position (TP) sensor electrical connector.







6. Remove the bolts and the sensor.

INSTALLATION
1. To install, reverse the removal procedure.