Dowels-Flywheel

Dowels-Flywheel

Removal





1. NOTE: Take care not to damage the flywheel dowel holes or surface areas around the flywheel dowel during removal.

Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and locking pliers where the flywheel dowel is installed in a blind hole.

Installation

1. NOTE: Care should be taken to drive the flywheel dowel squarely into place until fully seated and to not damage surrounding surface areas.

Install all flywheel dowels by driving them into place using a brass or plastic mallet.