Cluster Finish Panel

INSTRUMENT PANEL - CLUSTER PANEL

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the center instrument panel finish panel.
1 Rotate the center instrument panel finish panel vents inward.
2 Through the vent openings, grasp the center instrument panel finish panel and pull outward.
3 Remove the center instrument panel finish panel.
- Disconnect the electrical connectors.







3. NOTE: On automatic transmissions, move the shift lever to the 1 position to make removal easier.

Remove the upper steering column cover.
- If equipped, disconnect the bi-fuel tank selector switch.

4. Remove the headlamp switch.







5. Remove the instrument panel finish panel.
1 Remove the screws.
2 Remove the instrument panel finish panel.
- If equipped, disconnect the electrical connector.







6. Remove the instrument cluster panel.
1 Remove the screws.
2 Remove the instrument cluster panel.

INSTALLATION
1. To install, reverse the removal procedure.