Band and Clutch Application Charts

Band, Clutch, Solenoid, Switch Application Chart (A)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.





(a) PCM Calibration Controlled
(b) Cold Strategy
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
0 = Open
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (B)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.





(b) Cold Strategy
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
0 = Open
(D) Directly Proportional

Band, Clutch, Solenoid, Switch Application Chart (C)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO encased.





(a) PCM Calibration Controlled
(b) Cold Strategy
(c) 207 kPa (30 psi) until mph reaches 5 km/h (3 mph)
(d) Clutch Applied Through Manual Valve Position
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(D) = Directly Proportional
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (D)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.





(a) PCM Calibration Controlled
(b) Cold Strategy
O/R = Overrunning
LP = Low Pressure
LA = Low Current
H = Holding
(D) = Directly Proportional

Band, Clutch, Solenoid, Switch Application Chart (E)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.

Part 1 Of 2:

Part 2 Of 2:

(a) PCM Calibration Controlled
(b) Cold Strategy
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (F)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO engaged.

Part 1 Of 2:

Part 2 Of 2:

(b) Cold Strategy
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(D) Directly Proportional

Band, Clutch, Solenoid, Switch Application Chart (G)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO encased.








(a) PCM Calibration Controlled
(b) Cold Strategy
(c) 207 kPa (30 psi) Until mph Reaches 5 km/h (3 mph)
(d) Clutch Applied Through Manual Valve Position
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(D) = Directly Proportional
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (H)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.





(a) PCM Calibration Controlled
(b) Cold Strategy
O/R = Overrunning
LP = Low Pressure
LA = Low Current
X = Holding
(D) = Directly Proportional

Band, Clutch, Solenoid, Switch Application Chart (1)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO engaged.





(a) PCM Calibration Controlled
HP = High Pressure
LA = Low Current
LP = Low Pressure
HA= High Current
A = Applied
C = Closed
O = Open
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (J)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO engaged.





(a) PCM Calibration Controlled
HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (K)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD, OWC. The TCC may engage in PARK and NEUTRAL with PTO engaged.





HP = High Pressure
LP = Low Pressure
HA = High Current
LA = Low Current
A = Applied
C = Closed
O = Open
(D) = Directly Proportional
(I) Inversely Proportional

Band, Clutch, Solenoid, Switch Application Chart (L)

NOTE: The PTO may operate in any gear including PARK and NEUTRAL, does not require OD OWC. The TCC may encase in PARK and NEUTRAL with PTO engaged.

Part 1 Of 2:

(a) PCM Calibration Controlled
O/R = Overrunning
X = Holding
(D) = Directly Proportional