Fuel Conditioning Module Disassembly and Assembly
FUEL CONDITIONING MODULEDISASSEMBLY
1. Remove the fuel filter cover and drain the fuel from the housing.
- Remove and discard the O-ring.
2. Remove the fuel filter and discard.
3. Remove the screws and the manifold cover.
- Remove and discard the press-in-place gasket.
4. Remove the return valve assembly.
5. Remove the screws and the fuel pump.
- Remove and discard the O-rings.
6. Remove the screws and the fuel conditioning module mounting bracket.
ASSEMBLY
1. Install the fuel conditioning mounting bracket and screws.
2. Install new O-rings on the fuel pump and lubricate with clean engine oil.
3. Install the fuel pump and mounting screws.
4. Install the return valve assembly.
5. Install a new press-in-place gasket in the fuel manifold.
6. Install the fuel manifold and screws.
7. Lubricate the O-ring and install the fuel filter.
8. Install a new O-ring on the fuel filter cover and lubricate with clean engine oil.
9. Install the fuel filter cover.