Removal and Installation

REAR SEAT - THREE- OR FOUR-PASSENGER QUICK RELEASE BENCH

Removal and Installation

1. Disengage the detachable safety belt anchor if so equipped.
1 Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
2 Disengage the detachable anchor tongue end from the detachable anchor.

NOTE: Right seat latch handle shown, left seat latch handle similar.







2. Remove the bench seat.
1 Pull the right and left handles rearward to release the seat from the latch strikers.
2 Disengage the seat latch rod hook ends from the seat latch striker and remove the seat.

3. To install, reverse the removal procedure.
- Make sure the safety belt is not twisted, then insert the safety belt tongue into the detachable anchor until you hear a "click" and feel the latch engage.

4. Check the restraint system for correct operation.