Center Finish Panel

INSTRUMENT PANEL - CENTER FINISH PANEL

Removal and Installation
1. Remove the instrument panel cluster finish panel.







2. Remove the screws and the utility hook or if equipped, remove the dual fuel bezel.
- If equipped with the dual fuel switch bezel, disconnect the electrical connector.







3. NOTE: Open the ashtray/beverage holder to gain access to the lower beverage holder screws.

Remove the lower ashtray/beverage holder screws.







4. Remove the ashtray/beverage holder.
1 Remove the upper screws.
2 Remove the ashtray/beverage holder.







5. Remove the instrument panel center finish panel.
1 Remove the screws.
2 Remove the instrument panel center finish panel.
- Disconnect the electrical connector.

6. To install, reverse the removal procedure.