Multifunction Switch

Multifunction Switch

Removal and Installation





1. Remove the ignition switch lock cylinder.
1 Insert the ignition key into the lock cylinder and turn to the RUN position.
2 Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.





2. Twist the tilt wheel handle and shank and remove.





3. Remove the upper and lower steering column shrouds.
1 Remove the screws.
2 Remove the upper and lower steering column shrouds.





4. Remove the multifunction switch.
1 Remove the screws.
2 Disconnect the electrical connectors.
3 Remove the multifunction switch.
5. To install,reverse the removal procedure.