90000 MI or 144000 KM

Lubricate
    Wheel Bearing
      Lubricate 4x2 wheel bearings, replace grease seals, and adjust bearings. (under commercial use, as required)
Inspect
    Wheels
      Inspect wheels for end play and noise.
    Vehicle
      Multi-Point Inspection
    Steering and Suspension
      Inspect steering linkage, suspension and, if equipped, driveshaft and ball joints. If equipped, inspect and lubricate 4x2 ball joints and steering idler arms.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect cooling system and hoses.
    Brakes and Traction Control
      Inspect brake pads,shoes, brake discs, drums, brake lines and hoses.
    Ball Joint
      Inspect and lubricate 4x2 ball joints.
    Air Filter Element
      Check the air filter minder and reset after a new filter is installed.
Replace
    Oil Filter, Engine
      Replace oil filter only if NOT using Special Operating Conditions T, I or D.
    Fuel Filter
      Install new frame-mounted and engine fuel filters.
    Fluid Filter - A/T
      If equipped, change the external transmission fluid filter and in-line service installed transmission fuild filter.
    Fluid - A/T
    Engine Oil
      Replace oil only if NOT using Special Operating Conditions T, I or D.
Rotate
    Tires
      Inspect tires for wear.