Front

Stabilizer Bar and Link

Removal and Installation

1. CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. Install new parts with the same part number or an equivalent part if installation is necessary. Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.

With the vehicle in NEUTRAL, position it on a hoist.





2. Remove the bolts and the retainer brackets.





3. Remove the nuts, bolts, washers and the stabilizer bar and links.
4. To install, reverse the removal procedure.