Condenser to Evaporator Line

CONDENSER TO EVAPORATOR LINE

Removal and Installation

All vehicles
1. Recover the refrigerant.







2. Remove the tube clamp.

Vehicles equipped with auxiliary climate control







3. Disconnect the auxiliary line fitting.
- Discard the O-ring seals.

Vehicles with 6.0L Diesel







4. Remove the clamps and remove the intercooler tube (if equipped).

All vehicles







5. Disconnect the condenser to evaporator line from the A/C evaporator core.







6. Remove the eight pin-type retainers and the sight shield.







7. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
- Discard the O-ring seals.

8. To install, reverse the removal procedure.
- Install new O-ring seals.
- Lubricate the refrigerant system with the correct amount of clean PAG oil.

9. Evacuate, leak test and charge the refrigerant system.